UIP1868P Router Configuration Guide
The UIP1868P can function as your primary gateway/router or as a device client within an existing network configuration.
If you currently have broadband access and a gateway/router installed at your location, you may add the UIP1868P as a device client to your network. (See “A” below.) If you currently have broadband internet access and do not have a router, you may install your UIP1868P as the primary router to your network. (See “B” below.)
AInstalling the UIP1868P with an existing network configuration/router
Broadband
modem
Internet
Computer
Local router
UIP1868P
Plug one end of the enclosed Ethernet cable into the WAN port on the back of the UIP1868P. Plug the other end of the Ethernet cable into your router/gateway which is connected to your broadband modem. The UIP1868P will automatically obtain an IP address from your existing router.
BInstalling the UIP1868P as your primary gateway/router
Broadband
modem
Internet
UIP1868P |
|
|
|
|
|
|
| Computer | ||
| Local switch |
| ||||||||
|
| |||||||||
|
| or router | ||||||||
|
|
|
|
|
|
|
|
|
|
|
The UIP1868P supports the two most common broadband connection protocols: DHCP (most common connection type found with Cable Modem) and PPPoE (most DSL providers use this connection type).
