Heartland Bakeware 3805-3825 Installation Diagram- 30” Legacy Cooktop Model, D1 D2 D3, Clearances

Installation Diagram- 30” Legacy Cooktop Model 3800

A

C

D1

D2

D3

Figure 1

B

	Air intake slots on
	underside of control panel
	must not be obstructed or
	covered.
Dim	30" Legacy Cooktop
A	26 5/8" (68cm)
B	8 1/4" (21cm)
C	29 3/4" (76 cm)
D1	Standard profile: 14 1/4"(36 cm)
	(as shown in diagram)
D2	low profile: 10 1/8" (26 cm)
D3	high back w/ shelf:
	28 1/4" (72cm)
Table 1

Clearances

•Minimum distance between the cooktop and a side wall above the cooktop surface is 6” (see dim "J" in Table 2 on next page)

•Depth of cutout must not exceed 25”. (see dimension G) Air intake slots on underside of control panel must not be obstructed or covered.

Electrical requirements:

• Electrical hookup must be done by a licenced electrician

• 120 Volts 60Hz .375 kW 3 prong plug 5 ft-(1.5 m) power cord included.

Gas Requirements:

•Gas hook-up must be done by a licensed gas fitter.

•Pressure requirements: Natural gas: 6” W.C. (min); LP gas: 11” W.C. (min)

•Connection: 1/2” NPT

•An accessible manual shut off valve must be installed at the appliance.

•Note: This unit contains a pre-set regulator

•Natural Gas/Propane Conversion kits are available - must be done by a licensed gas fitter

3