Power Failure Operation |
| Gas Trouble Shooting |
Electricity to the cooktop only powers the auto ignition. If electrical power is interrupted, meals can still be cooked on the top burners of your cooktop. Follow these simple directions to manually light the burners.
Caution: Make sure your hands and clothing are clear of the burner when lighting it!
Manually Lighting the Burners
1.Remove cast grate, for unobstructed access to the burner head.
2.Hold a flame source to the outside burner head. We recommend a barbecue lighter as a flame source (see fig. 9)
3.Push in and turn the corresponding control knob to the medium setting.
4.After the burner lights, adjust flame size as required.
5.Carefully replace cast grate. Keep fingers clear of the flame.
Manually Lighting the Grill
1.Remove porcelain grill.
2.Place a flame source (barbecue lighter) through the mesh near the back of the grill burner. Turn the back control to the medium position (3).
3.Repeat this for the front grill burner.
Do not attempt to light front burner by using the lit back burner.
Please note that the “auto reignition” feature will not function without electricity.
If you smell gas:
Finding a gas leak is not a “do it yourself” procedure. If you smell gas, turn off the supply of gas to the range and call for service.
If you have other problems:
Before any component is replaced, follow this
1.Be sure problem is not due to improper operation.
2.Check basic adjustments – correct pressure, dirt in the line, etc.
3.Ensure correct gas setting used. Setting should be set for either propane or natural gas.
4.If gas pressure and all adjustments seem correct, use the following chart to help identify the problem and/or malfunctioning component.
If you still require help...
Contact your dealer and/or service techni- cian. Should you still require help, see the “Reference” section on how to contact Heartland Appliances.
21
