Uniden UIP 160P Adjusting the Earpiece and Speaker Volume, Temporarily Muting the Ringer

Storing a Redial Record

1)With the phone in standby mode, press redial/p/vol/∨.

2)Press cid/vol/∧ or redial/p/vol/∨ repeatedly to display the number to be stored.

3)Press the EDIT soft key, then select Store into PB? , and then OK soft key.

4)To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone Numbers, Names, Distinctive Rings, and Speed dial)" on page 38-39.

Adjusting the Earpiece and Speaker Volume

You can select from among six volume levels on the handset. Pressing the volume up key or volume down key during a call will change the earpiece or speaker volume. This setting will remain in effect after the telephone call has ended.

If you press the volume up key when the earpiece is at the maximum volume level, an error tone sounds.

The error tone also sounds if you press the volume down key at the lowest volume.

Temporarily Muting the Ringer

You can mute the ringer individually on a handset. When the phone is ringing, press end or the MUTE soft key on the handset you want to mute. This mute will last for the current incoming call only. The ringer tone will return to the previous setting on the next incoming call.

note

While charging a handset, you can not mute the ringer tone for the handset.

U S I N G Y O U R P H O N E

w w w . u n i d e n . c o m U S I N G Y O U R P H O N E [ 3 4 ]