Uniden UIP 160P owner manual For Telephone Features

	Scenario	Check to see if...			Then try...
		The LAN LED on the UIP160P is off		Making sure the cable between the UIP160P and your computer is
		and/or the LINK LED on your		1)	Securely connected to the UIP160P's LAN port.
				2)	Securely connected to your computer's Ethernet card
		computer's Ethernet card is off.
				3)	Free of any frays, loose connectors, or other visible defects
		Your computer doesn't have an IP
	Your computer is	address. (In most Windows systems,		1)	Making sure your computer is configured for DHCP.
		open a command prompt window		2)	Making sure the UIP160P's DHCP Server is enabled.
	unable to connect to
		and enter the command ipconfig.)
	the Internet.
		Your computer's IP address and		1)	Making sure the first three parts of your computer's IP address match the
					UIP160P's IP address and the fourth part is different
		subnet mask are on a different
				2)	Making sure your computer's subnet mask exactly matches the subnet
		network than the UIP160P's.
					mask of the UIP160P.
		The UIP160P is not the default		1)	Making sure your computer's default gateway address is set to the
		gateway for your computer.			UIP160P's IP address.
	Your UIP160P	The CA (call agent) LED is off.		1)	Resetting the UIP160P.
				2)	Contacting Packt8 to verify the necessary SIP configuration settings.
	handset has no dial
				1)	Plugging a standard analog phone into the UIP160P's VoIP1 port. If this
	tone.	The CA (call agent) LED is on.
					works, your UIP160P may be damaged. Contact Uniden customer service.
	For Telephone Features
	Symptom				Suggestion
	The charge LED won't illuminate		• Make sure the AC adapter is plugged into the base or the charger (if you have more than one
	when the handset is placed in		handset) and wall outlet.
			• Make sure the handset is properly seated in the cradle.
	the cradle.
			• Make sure the charging contacts on the handset are clean.
[ 6 1 ] T R O U B L E S H O O T I N G					w w w . u n i d e n . c o m