Installing the Phone

Expanding Your Phone

Adding accessory handsets

Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle.

Your phone is compatible with the following Uniden DECT6.0 accessory handsets: DCX200, DCX300 and DWX207. (Please visit our website at www.uniden.com for the most up-to-date list of compatible handsets.)

If you purchase any accessory handsets separately, you must register the handsets to the base before you can use them. (Accessory handsets that come packaged with a base are already registered to that base.)

Registering accessory handsets

When charged, registered handsets display a handset ID number. Handsets that have not been registered display:

To register an accessory handset:

1)Charge the handset completely. (DCX200 and DCX300 handsets need to charge for 15-20 hours. DWX207 handsets need to charge for at least 25 hours.)

) Disconnect the base AC adapter. Then press and hold find while you reconnect the adapter. Keep pressing find until the charge LED starts to blink.

3)On the handset, press and hold # until the handset beeps and displays HANDSET REGISTERING.

4)When the handset has registered to the base, the LCD will display REGISTRATION COMPLETE then show the handset ID number.

If the display shows REGISTRATION FAILED, repeat the process again.

Note: If a handset has ever been registered to a base, reset the handset before you register it to a new base (see Resetting the Handset on page 49). Or to use multiple bases, see the next section.

12

Page 12
Image 12
Uniden WXI2077 Series manual Expanding Your Phone, Adding accessory handsets, Registering accessory handsets