Storing Caller ID or Redial Numbers in the Phonebook
You can store Caller ID records or redial numbers in the phonebook so you can use them later. Go to the Caller ID or redial list and select the number you want to store. (If the Caller ID information did not include the number, then you will not be able to store it.)
1) With the phone in standby, press 
to open the Caller ID list or Redial/Pause to open the redial list.
) Use 
and 
to scroll through the Caller ID records or redial numbers. When you come to the information you want to store, press Menu/Select.
Note: If you need to add (or delete) a “1” to the beginning of the Caller ID phone number, press */tone (see page 32). If you need to add (or delete) the stored area code to the Caller ID phone number, press # (see page 33).
3)Select STORE INTO PB. EDIT NAME appears. If the phone number is already stored in memory, you will hear a beep, and THIS DATA IS ALREADY SAVED! appears in the display. The number will not be stored.
4)Continue by following the steps for Creating Phonebook Entries on page 24.
Deleting a Single Phonebook Entry
1) | With the phone in standby, press . | Edit | |
) Find the entry that you want to delete and press Menu/Select. | |||
Copy | |||
3) | Select DELETE. DELETE ENTRY? appears in the display. | Delete | |
4)Move the cursor to select YES.
5)Press Menu/Select. You will hear a confirmation tone, and DELETED! appears in the display.
Setting Up the Phonebook
26
