Activate the Handset

The handset is powered by a rechargeable battery pack already installed in the handset’s battery compartment.

Before charging the battery for the first time, push the activation pin, located on the bottom of the handset

(see label with instructions).

Once you activate the handset, remove the label.

Note: Use only the Uniden BT-1008 rechargeable battery pack supplied with your cordless telephone.

Connecting the AC Adapter

To the base

To avoid risk of fire and shock, only use the Uniden PS-0012 AC adapter with the base.

Installing the Phone

Connect the AC adapter to the DC IN 6V jack on the bottom of the base.

Don’t put any power cord where it people might trip over it or step on it. If a power cord becomes chafed or worn out, it can create a fire or electrical hazard.

Connect the AC adapter to a standard 120V AC wall outlet.

Page 7
Image 7
Uniden WXI2077 Series manual Activate the Handset, Connecting the AC Adapter, To the base