Uniden WXI3077 Using Your Phone, Learning the Basics, How to enter text on your phone, Do this

Banner	Change the name used on the handset’s display.
Handset	Change the display language.
Language
Key Touch Tone	Have the keypad sound a tone when you press a
	key.

The Day and Time menu

If you subscribe to Caller ID, the phone automatically sets the day and time when it receives Caller ID information from your phone

company. If you want to set the clock manually, just open the menu and select Day and Time. The phone prompts you to select the day,

enter the time, and select AM/PM. (When prompted for the time, use the number keypad to enter 2 digits for the hour and 2 digits for the minutes, e.g., 0530 for 5:30.)

The Global Setup menu

The settings on this menu affect all handsets and the base. Before changing these settings, make sure the phone is in standby and all handsets are within range of the base. (Only one handset at a time can change these settings.)

Dial Mode	Change the way your phone communicates with
	the telephone network (see page 23).
Set Line Mode	Do not change this setting unless instructed to by
	customer service.
Edit V_Mail No.	Program a number to dial for voice mail access (see
	page 15).
VMWI Reset	Reset the message waiting indicator if it gets out of
	sync with your voice mail service (see page 16).

How to enter text on your phone

Use the 12-key dial pad when you want to enter text into your phone (i. e., a name in the phonebook, the handset banner).

The phone defaults to a capital letter for the first letter and any

letter after a space; otherwise, it uses small letters.

10

To switch to all capital letters, press *. The phone displays [Aa] and defaults to all capital letters first (e. g. ABCabc2) until you enter a blank space or press * again. Pressing * again will change to lowercase letters first ([aA]). Any time you want to change case, just press *.

If two letters in a row use the same number key, enter the first letter and wait a few seconds (or press Right); the cursor will move to the next space. Enter the next letter.

Press # to enter a blank space.

To change a letter, move the cursor to that letter and press Clear to erase the letter. Then, enter the next letter.

To erase the entire entry, press and hold Clear.

Press 0 to cycle through all available symbols and punctuation.

Using Your Phone

You can control the features in this section through the handset.

Learning the Basics

To...	Do this
	From the earpiece...		From the speaker...
make a call: Dial the	Press Talk/flash.		Press Speaker.
number, then
answer a call	Press Talk/flash.		Press Speaker.
hang up	Press End or put the handset in the cradle.
mute the microphone	Press mute. Press again to turn the microphone
during a call	back on.
put a call on hold	Press Clear/intercom. After 5 minutes on hold,
	the call will be disconnected.
return to a call on	Press Talk/flash.		Press Speaker.
hold
		11