Resetting Your Handset

If you are having trouble with a cordless handset or if you want to replace one, you need to clear the registration information from the base and the handset:

 

Do you have the base the handset is registered to?

Yes

No

 

 

 

 

 

1.

Press and hold END and # until

1.

Press and hold END and

 

the System Reset menu appears

 

# until the System Reset

 

(about 5 seconds).

 

menu appears (about 5

2.

Select Deregister HS. The display

 

seconds).

 

lists all registered handsets.

2.

Select Base Unavailable.

3.

Select the handset you want to

3.

When the handset asks

 

reset.

 

you to confirm, select

4.

When the handset asks you to

 

Yes. The handset deletes

 

confirm, select Yes. The handset

 

its own link without

 

clears its information from the

 

contacting the base.

 

base and deletes its own link to

 

 

 

the base.

 

 

Once you have reset a handset (or if you buy a new one) , that handset displays a Handset Not Registered message. If you see this message on

a handset, you need to register it to a base before you can use it (see page 17).

AC Adapter and Battery Information

AC Adapter

Part Number

Input Voltage

Output Voltage

 

 

 

 

 

PS-0035

120V AC, 60 Hz

8V AC @ 300mA

Battery Pack

 

 

 

 

 

 

 

 

 

Part Number

 

Capacity

 

 

BT-1018

 

500mAh, 2.4V DC

 

 

 

 

 

 

 

24

 

 

 

 

Use only the supplied AC adapter. Be sure to use the proper adapter for the base and charger.

Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

Do not place the unit in direct sunlight or subject it to high temperatures.

Fully charged, the battery should provide about 8 hours of talk time and about 7 days of standby time. For best results, return the handset to the cradle after each call to keep it fully charged.

When the battery gets too low, the handset shows a low battery alert. If you hear a strange beep during a call, check the display: if you see the low battery alert, finish your conversation as quickly as possible and return the handset to the cradle. If the handset is in standby, none of the keys will operate.

With normal use, the battery should last about one year. Replace the battery when the talk time becomes short even when the battery is charged. To buy a replacement battery, call the Parts Department listed on the front cover.

Rechargeable Nickel-Metal-Hydride battery warning

This equipment contains a rechargeable Nickel-Metal-Hydride battery.

Nickel is a chemical known to the state of California to cause cancer.

Do not short-circuit the battery.

The rechargeable batteries contained in this equipment may explode if disposed of in a fire.

Do not charge the battery used in this equipment in any charger other than the one designed to charge this battery as specified in the owner's manual.

Using another charger may damage the battery or cause it to explode.

Rechargeable Batteries Must Be Recycled or Disposed of Properly.

Uniden works to reduce lead content in PVC coated cords in our products and accessories.

Warning! The cords on this product and/or accessories contain lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling.

Replace the Rechargeable Handset Battery Pack

Follow these steps to replace the battery:

25

Page 13
Image 13
Uniden WXI3077 manual Resetting Your Handset, AC Adapter and Battery Information