❉If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Handset will not function.
To reestablish communication between the Handset and Base Unit:
1.Restore power to the Base Unit.
2.Place the Handset back on the Base Unit.
3.The Battery icon will blink to indicate that the Digital Security Code is set.
TOTAL CALLS 10
Entering the Local Area Code
❉Please refer to the foldout in front of your operating guide for key positions.
You must enter your local area code for the Caller ID redial features to work properly.
To enter your local area code:
1. Remove the Handset from the Base Unit.
2.Press flash/function twice.
AREA CODE 1-
3.Enter your local area code. For example, 817.
4.Press mem. A confirmation tone sounds and the display remains on for two seconds.
AREA CODE
STORING
6 CALLS
5.Place the Handset on the Base. The Battery icon will blink to indicate that the area code is stored.
TOTAL CALLS 10
29
