Uniden XS210 manual Battery Maintenance, Using Your Phone, Battery use time per charge

XS210.Qx 10/6/03 5:27 PM Page 6

Use only the Uniden Battery (BT-905) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department.

For optimum performance, be sure to return the handset to the base unit after each telephone call.

•The key redials the last number dialed.

•The redialed number can be up to 24 digits long.

BATTERY MAINTENANCE

Battery use time (per charge)

From fully charged

•Up to seven hours continuous use

•Up to fourteen days when the handset is in the standby mode

Low Battery Alert

If the phone is not in use, the talk/batt low LED flashes when the battery pack is low.

If the phone is in use, the talk/batt low LED flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base for charging.

Cleaning the battery charging contacts To maintain a good charge, it is important to clean the charging contacts on both the handset and base unit once a month.

Use a dry cloth to clean.

USING YOUR PHONE

Making and Receiving Calls

			Handset On Base			Handset Off Base
Answer call	When the phone rings, remove the				Press			, any number key,
	handset from the base (Auto Talk).					, or	.
	1)	Remove the handset from the			1)	Press		.
		base and press		.		The talk/batt low LED
	2)	The talk/batt low LED			2)
Make call		flashes and turns on.				flashes and turns on.
	3)	Listen for the dial tone.			3)	Listen for the dial tone.
	4)	Dial the number.			4)	Dial the number.
Hang up	Press		or return the handset to the base (Auto Standby).
	1)	Remove the handset from the			1)	Press		.
		base and press		.	2)	Listen for the dial tone.
Redial	2) Listen for the dial tone.
	3)	Press		to dial the	3)	Press			to dial the
		last dialed number.				last dialed number.
Ringer Mute	None				Press			when ringing.

5