Uniden XS210 manual Flash and Call Waiting, Pause, Dialing a Stored Number

XS210.Qx 10/6/03 5:27 PM Page 8

You must subscribe through your local telephone company to the Call Waiting Service.

You have 30 seconds after

pressing to enter the number you wish to store.

Otherwise, the handset will beep rapidly.

The pause button counts as one digit. Pressing more than once increases the length of pause between numbers.

If you select a memory location that does not have a stored number, the handset will beep rapidly and the phone will not dial.

FLASH AND CALL WAITING

If the call waiting tone sounds during a call:

AUSTRALIA: Press , then to switch between callers.

NEW ZEALAND: Press to switch between callers.

STORING A PHONE NUMBER IN MEMORY

Your cordless phone has 1 Rocket Dial memory location and 10 additional memory locations for storing important telephone numbers. You can store your most frequent dialed number in the one-touch Rocket Dial location.

Memory Dial

1) Remove the handset from the base.

2) Press . The talk/batt low LED flashes.

3) Enter the phone number, up to 20 digits.

4) Press again.

5) Press memory location ( ) on the keypad to store the number.

A tone indicates that the number is stored. If you enter a number in a location that has a previously stored number it will overwrite the existing number without warning.

Rocket Dial

Follow step 1-4 above then at Step 5. Press on the keypad to store to your number into the Rocket Dial location.

PAUSE

If a pause is needed during the dialing sequence for services such as Telephone banking, Press "pause/redial" to insert a pause. Each pause counts as a digit and represents a two second delay in time between digits as they are sent.

DIALING A STORED NUMBER

Using the memory location features

1)Press , then press .

2)Enter the memory location ( ) on the keypad. The stored number automatically dials.

7