XS210.Qx 10/6/03 5:27 PM Page 9
If you press 
and a phone number is not stored in the
If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically next time the battery pack is charged.
One-touch Rocket Dial
Your phone is equipped with
To instantly dial the phone number stored in the
location, simply press |
| . (There is no need to press |
| . The |
|
| |||
phone will automatically dial). |
|
|
|
|
CHAIN DIALING
The memory locations on the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
and are prompted to enter the account number, simply press 
and the
location number ( 
) where the special number has been stored.
Store your special number in memory as you would store a phone number (Refer to “Storing a Phone Number in Memory” on page 7).
ERASING A STORED NUMBER FROM MEMORY
1)Remove the handset from the base unit.
2)Press 
twice.
3)Press 
or the memory location ( 
). A tone indicates that the stored number is erased from memory.
CHANGING THE DIGITAL SECURITY CODE
The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
1)Remove the handset from the base unit. Press and hold 
on the base.
2)The handset begins emitting a paging sound. While holding
, place the handset in the base unit. The paging sound stops. Leave the handset in the base for more than 3 seconds. A new random security code is set.
8
