Uniden XS210 manual Troubleshooting, Status

XS210.Qx 10/6/03 5:27 PM Page 10

Do not attempt to service this unit yourself. Servicing must be performed by qualified personnel.

TROUBLESHOOTING

If your cordless telephone is not performing to your expectations, please try these simple steps.

Symptom		Suggestion
The status	• Make sure the AC adapter is plugged into the base
LED won’t illuminate when	and a wall outlet.
the handset is placed	• Make sure the handset is properly seated in the
in the base.	base.
	• Make sure that the charging contacts on the
	handset and on the base are clean.
The audio sounds weak	• Move the handset and/or base to a different
and/or scratchy.	location away from metal objects or appliances
	and try again.
	• Press	to help eliminate background
	noise.
Can’t make or receive	• Check both ends of the telephone line cord.
calls.	• Make sure the AC adapter is plugged into the base
	and a wall outlet.
	• Make sure that the base antenna is in the vertical
	position.
	• Disconnect the AC adapter for a few minutes, then
	reconnect it.
	• Change the digital security code (See page 8).
	• Make sure that the handset is not too far from the
	base.
Handset doesn’t ring or	• The battery pack may be weak. Charge the battery
receive a page.	for 15-20 hours.
	• The handset may be too far away from the base.
	• Place the base away from appliances or metal
	objects.
	• Change the digital security code (See page 8).
Severe noise	• Keep the handset away from microwave ovens,
interference	computers, remote control toys, wireless
	microphones, alarm systems, intercoms, room
	monitors, fluorescent lights, and electrical
	appliances.
	• Move to another location or turn off the source of
	interference.
Your phone has been	• Return to your local service agent immediately.
exposed to moisture or
liquid
If you still have	• www.uniden.com.au (AUSTRALIA) or
a problem	• www.uniden.co.nz (NEW ZEALAND)

9