5.3.3 RV BOOM FOR GDC
This boom has lateral diffusers (variable and moveable) and two top arms with hydraulic or manual adjustment, so the jets can be directed onto the vegetation to be treated.
In the bottom part there are two adjustable, telescopic distributors for GDC treatment.
The height of the structure can be adjusted by hand for different types of vegetation.
The
5.4HYDRAULICS
The RV, VL, VLX, FXF and FXL model distributor accessories have hydraulics that can be controlled by the operator directly from the seat in the cab.
Check that no one and nothing is in the area where the booms will open; particular attention should be paid to the presence of any electric power lines.
The hydraulic plant can be fed from the hydraulic pump of the tractor.
The hydraulics can be controlled using the lever of the tractor (RV and VL) or a hydraulic distributor with mechanical or
-All of the controls on both versions are sustained action controls and each lever or switch has a pictogram of the relevant operation it controls.
WARNING: with hydraulic booms, don’t stand in the range of action of the machine.
Pay attention to the integrity and efficiency of the hydraulic components and in particular to the pipes to prevent the risk of bursting.
Do a full check on the pipes and components at least once a year, we recommend replacing hydraulic pipes every
5.4.1OIL FEED FROM TRACTOR (for hydraulic systems)
Connect the delivery and discharge
The distributor inlet pipe is connected to the aluminium flow separator valve next to the distributor.
The flow separator must be adjusted correctly so it sends less than
To prevent the cylinders moving at a dangerous speed, adjust the relevant chokes near the cylinders. If the registration ringnuts aren’t visible then fixed chokes are fitted. The chokes are fitted on the discharge line of the movement to slow.
Any impurities in the oil could block the chokes and as a consequence block the cylinder; remove the dirt if necessary. The maximum pressure valves of the distributors are regulated to a pressure of around 150 bar.
To prevent the excessive heating of the oil we recommend supplying the distributor of the sprayer only when the cylinders are being used.
We recommend having qualified personnel do any adjustments.
Pay attention to the integrity and efficiency of the hydraulic components and in particular to the pipes to prevent the risk of bursting.
Do a full check on the pipes and components at least once a year, we recommend replacing hydraulic pipes every
RV per GDC
unigreen 19
