Unisen LT-40153 Before You Begin, First-Time Power-On, Welcome screen, Home Fast Power On Retail

1. Basic Setup and Operation 9

Before You Begin

1.Review the important safety, installation, and oper- ating information at the beginning of this book.

2.Choose a location for your TV.

•See the stand-installation or wall-mounting requirements on the opposite page.

•Allow at least four inches of space on all sides of the TV to help prevent overheating. Over- heating may cause premature failure of the TV.

•Avoid locations where light may reflect off the screen.

3.Install the batteries in the remote control.

4.Plug the TV into an AC power outlet.

First-Time Power-On

1.Confirm that the remote control is in TV mode.

•Press the side button once to light the mode indicator and confirm that TV mode is active.

•To change, press the side button additional times to activate TV mode.

2.Aim the remote control

at the TV and press the

POWER key . Wait for the

Welcome screen.

TV

GUIDE MENU INFO BACK

GUIDE MENU INFO BACK

3. Press if you wish to change the menu language to Español.

4. Press to move to the energy-mode selections. See the information box for details.

TV power connection	5. Press	to highlight EXIT.
	Press	ENTER to clear the
	menu.

Welcome Screen Energy Options

• Mitsubishi recommends the Home setting, which uses power within ENERGY STAR® guidelines.

• Home Fast Power On allows the TV to power up quickly. While powered off, however, the TV uses power in excess of ENERGY STAR guidelines for a powered-down device.

• The Retail setting looks best under bright light- ing. In this mode, the TV uses power in excess of ENERGY STAR guidelines.

This table compares energy choices offered in the Welcome screen.

		Home Fast
	Home	Power On	Retail
Picture Mode	Bright	Bright	Brilliant
Backlight	Reduced	Reduced	Full
Level	Brightness	Brightness	Brightness
Time to	Normal	Fast	Normal
Power On

Downloaded From TV-Manual.com Manuals