5 NetCommand IR Control

55

About NetCommand IR Control

•NetCommand IR home-theater control is avail- able on 153 and 249 series TVs.

•IR emitter cables are available for purchase from Mitsubishi. Visit www.mitsuparts.com or call

800-553-7278 and request one of the following: -- 242D483020 (two-ended cable)

-- 299P254020 (four-ended cable).

•NetCommand setup is optional.

•You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward.

•NetCommand operates by sending remote control signals from the TV to your other devices via the IR (infrared) emitters, telling the devices to play, record, change inputs, adjust volume, change chan- nels, or perform other functions. All this is accom- plished with the TV’s remote control left in TV mode.

•You may wish to use NetCommand IR control to supplement control of CEC-enabled devices.

Important Note on NetCommand

Be sure to connect the IR emitter cable to the TV and properly place the emitters so that NetCommand can control your devices.

Downloaded From TV-Manual.com Manuals

Page 54 Page 56
Page 55
Image 55
Unisen LT-46153, LT-52153, LT-40153, LT-46249, LT-46151, LT-40151 About NetCommand IR Control, Important Note on NetCommand
Page 54 Page 56
Top Page Image Contents