Multi-Tech Systems MMV1600 owner manual Stdm, Stop Bit Command SB1-SB2, Transmit XMT Indicator

Source Node Command (SN)	5-13
Specifications	1-17
Stat Muxes	1-3
Statistical Multiplexers	1-3
Status Report Baud Rate (#RB)	5-18
Status Report Time (#RT)	5-18
STDM	1-4
Stop Bit Command (SB1-SB2)	5-13
Store New Parameters command	5-5

Store New Parameters Command (&W) 5-1 Switch and LED Operational Test (&T7)

............................................................	5-26
Switches and Shunts	3-9
Synchronous Communications	1-1
Synchronous Composite Links	1-1
Synchronous Data Packets	1-3
System Control	1-17
System Features	1-10
T
Tech Support	1-2, 8-2
Telco Facility	2-2
Terminals	1-4
Test Cables	7-2
Test Commands (&T1-&T12)	5-25
Test Mode (TM) Indicator	3-4
Transmit (XMT) Indicator	3-2, 3-4
Troubleshooting	7-3
U
Universal Channel Parameters (C0)	...... 5-9
V
V.22bis/V.22	1-19
V.24 Position	4-3
V.24 Shunt	3-11
V.24/V.35 Shunt	4-3
V.35	1-8
V.35 Interface	3-11
V.35 Interface Adapter Cable	4-4
V.35 Position	4-3
V1LIFXO Command	2-8
V1RIFXS Command	2-8
V2LIFXO Command	2-8
V2RIFXS Command	2-8
Voice (VCE) Indicator	3-4
Voice Channel	1-18
Voice Digitization Rates	1-18
Voice-Grade Phone Line	1-4
Voice/Fax	1-10
Voice/Fax Board	4-2
VOICE/FAX CHANNEL 1 E&M Connector
..............................................................	3-7
VOICE/FAX CHANNEL 1 FXO Connector
......................................................	2-8, 3-8
VOICE/FAX CHANNEL 1 FXS Connector
..............................................................	3-7

VOICE/FAX CHANNEL 1or 2 E&M Connector 2-15 VOICE/FAX CHANNEL 1or 2 FXS Connector 2-13 VOICE/FAX CHANNEL 2 E&M Connector

.............................................................. 3-7