$DSUACL - SELECTS CLOCKING FOR INTERNAL DSU LINK A. $DSUBCL - SELECTS CLOCKING FOR INTERNAL DSU LINK B. $DSUASP - SELECTS SPEED FOR INTERNAL DSU LINK A. $DSUBSP - SELECTS SPEED FOR INTERNAL DSU LINK B.
EXTERNAL DSU/MODEM
$MUXACL - SELECTS CLOCKING WHEN USING EXTERNAL DSU/MODEM PORT A. $MUXBCL - SELECTS CLOCKING FROM EXTERNAL SYNC DEVICE ON PORT B. $MUXASP - SPEED OF THE CLOCK IF SUPPLIED BY THE MULTIPLEXER PORT A. $MUXBSP - SPEED OF THE CLOCK IF SUPPLIED BY THE MULTIPLEXER PORT B. $MUXB - SELECTS PORT B AS SYNC DATA CHANNEL OR COMPOSITE LINK.
FOR HELP ON A SPECIFIC COMMAND, ENTER "ATH" FOLLOWED BY THE COMMAND LETTER.
EXAMPLE: ATH$DSUACL "ENTER"
The H4 menu is as follows:
ADDITIONAL COMPOSITE LINK COMMANDS
#C | - CLEAR COMPOSITE STATISTICS |
$F - LOAD FACTORY DEFAULTS FOR DSU AND ISCC | |
#FT | - FLUSH TIMER VALUE |
$L - LIST CONFIGURATION OF PORT A & B | |
#L | - LIST COMPOSITE LINK SETTINGS |
#RB | - SET AUTO REPORTING BAUD RATE |
#RT | - SET AUTO REPORTING TIME INTERVAL |
#RXT - PROGRAMMABLE RETRANSMIT TIMER | |
#S | - COMPOSITE LINK STATISTICS |
#SL | - STATUS OF FRONT PANEL LEDS |
FOR HELP ON A SPECIFIC COMMAND, ENTER “ATH” FOLLOWED BY A COMMAND LETTER.
The H5 menu is as follows:
MISCELLANEOUS COMMANDS
I- ID CODE
#MA | - MODEM ACCESS FOR COMMAND MODEM | |
#RA | - REMOTE ACCESS FOR COMMAND MODEM | |
&T | - | TEST MODES |
&W | - | SAVE PARAMETERS "WRITE TO MEMORY" |
Z- RESET MULTIMUX
FOR HELP ON A SPECIFIC COMMAND, ENTER “ATH” FOLLOWED BY A COMMAND LETTER.
The H6 menu is as follows:
VOICE/FAX CHANNEL COMMANDS
VL | - LIST THE VOICE/FAX CHANNEL PARAMETERS | |
V(1/2)Z | - | RESET VOICE/FAX CHANNEL |
V(1/2)DR | - VOICE/FAX CHANNEL DIGITIZING RATE | |
V(1/2)DC | - | VOICE/FAX DESTINATION CHANNEL |
V(1/2)DN | - | VOICE/FAX DESTINATION NODE |
V(1/2)ML | - LINK THE VOICE/FAX CHANNEL WILL COMMUNICATE OVER | |
V(1/2)OL | - VOICE/FAX CHANNEL OUTPUT LEVEL ATTENTUATION | |
V(1/2)IL | - VOICE/FAX CHANNEL INPUT LEVEL GAIN | |
V(1/2)SS | - VOICE/FAX CHANNEL SILENCE SUPPRESSION | |
COMMAND EXAMPLE 1: ATV1DN2 - SETS THE DESTINATION NODE OF CHANNEL 1 TO 2.
FOR HELP ON A SPECIFIC COMMAND, ENTER “ATH” FOLLOWED BY A COMMAND LETTER.
The H7 menu is as follows:
ADDITIONAL VOICE/FAX CHANNEL COMMANDS
V(1/2)LI | - | VOICE/FAX CHANNEL LOCAL INTERFACE |
V(1/2)RI | - | VOICE/FAX CHANNEL REMOTE INTERFACE |
V(1/2)WT | - | VOICE/FAX CHANNEL WINK TIMER |
