Printer Maintenance, Print-Head Cleaning

Chapter 4

Printer Maintenance

Print-Head Cleaning

You may need to clean the print-head and platen roller after printing a number of rolls of paper, whenever you load new supplies or when you see voids in the printout.

•Open the paper door by pressing the paper door release button as shown in

“Adding Paper” on page 14. The paper supply door will pop up.

•Remove the paper roll.

•Moisten a cotton swab with isopropyl alcohol and clean the print-head.

•Clean the platen roller with a dry cloth or small brush. Make sure the platen roller is clean all the way around.

•Moisten another cotton swab with isopropyl alcohol. Rub the swab across the black mark sensor to remove any build-up.

•Moisten another cotton swab and rub the swab across the tear bar to remove any build-up.

NOTE: You may experience dust build-up depending on the environment and the quality of the paper supply. If this occurs, use a can of compressed air to blow dust and paper debris out of the printer.

Do not use sharp objects to clean the print-head. This may damage the printer and require service.

Charging the Printer Battery

The printer battery is charged using the wall-mounted adapter provided. Follow these steps to charge the battery:

•Plug the AC adapter output cable into the AC adapter port as shown in “Charging the Battery” on page 11.

•Plug the AC adapter output cable into the appropriate AC line voltage socket.

•The yellow/amber charging LED will illuminate indicating that the battery is being charged.

•The battery will be fast-charged and after 180-minutes the LED will turn off.

•To remove the battery, open the battery door and tip the battery out of

the printer.

Important Notes on Charging Batteries

•The MP200 Mobile Printer requires an adapter output of 10V DC/1.32A.

•The battery fast-charge is initiated each time the AC adapter output cable is connected to the printer.

•The fast-charge controller checks the battery’s voltage and temperature before the start of the fast-recharge process. If the battery voltage or the temperature is outside of the fast-charge limits, the charger defaults to trickle-charge at C/10 or 70 mA rate.

•Optional external battery chargers are available for Unitech batteries.

Refer to “Printer Supplies” on page 30.

Important Notes on Replacing Batteries

•Check for the correct Unitech part number for the battery and only order that part for your new battery.

Caution! Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to instructions on page 28.

Verifying Battery Charge State

Follow the steps below to identify and correct any battery power problem that may be encountered. This will help identify that the fault is with the printer and not some other part of your system.

To Test the AC Adapter:

•Use a multimeter and measure the output voltage. Output should be 10V DC.

•Press the on/off button and wait until all LEDs are off.

•Insert the AC adapter output cable into the printer. If the Amber LED goes on, the battery is not fully charged, but the charge circuit is functioning.

•The AC power portion of the circuit appears ok.

MP200 specifications

The Unitech MP200 is a versatile and rugged mobile computer designed to meet the demanding needs of various industries, including retail, logistics, and healthcare. This device seamlessly combines durability with advanced technology, making it an ideal tool for professionals who require reliable performance in challenging environments.

One of the standout features of the Unitech MP200 is its robust design. Engineered to withstand drops from a height of up to 1.5 meters, it ensures longevity and reliability in dynamic work settings. Furthermore, the device is sealed to an IP65 rating, providing protection against dust and water, which is essential for outdoor use and exposure to harsh conditions.

The MP200 is equipped with a high-performance processor, enabling it to run complex applications smoothly. Its Android operating system offers a user-friendly interface, making it easy to navigate and access various software solutions. The device supports both Wi-Fi and Bluetooth connectivity, allowing for seamless data transmission and integration with other devices and systems.

For data capture, the Unitech MP200 features a built-in 2D barcode scanner. This advanced scanning technology enables quick and accurate reading of barcodes, enhancing efficiency in inventory management and point-of-sale operations. In addition to barcoding capabilities, the MP200 also supports NFC (Near Field Communication), providing a further layer of versatility in payment processing and data transfer.

The device is equipped with a bright 4.3-inch display that fosters easy readability, even in bright sunlight. The touchscreen interface is responsive and supports multi-touch gestures, adding to the user-friendliness of the device. The MP200 also includes various input options, such as a physical keypad, catering to users who prefer tactile feedback while typing.

With a long-lasting battery that provides an operating time of up to 12 hours, the Unitech MP200 ensures that users can rely on it throughout their work shifts without frequent recharging. This feature is particularly beneficial for field operations where access to charging facilities may be limited.

Overall, the Unitech MP200 is a powerful mobile computer that fuses durability with cutting-edge technology. Its robust design, advanced data capture capabilities, and long battery life make it a trusted choice for businesses looking to enhance productivity and streamline operations in various demanding environments.

Unitech MP200 manual Printer Maintenance, Print-Head Cleaning, Charging the Printer Battery

Models: MP200