Unitech MT380 - page 22

Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
22
7. Tap Enroll to input a new sample ID
for the ngerprint (e.g. 123). Tap OK
after inputting the sample ID.
8. When this window shows, place a
nger on the sensor three times.
9. The ngerprint is enrolled into
the program and displayed in
the Slot-Id eld.
10. Select a ngerprint ID and tap
Verify to start verifying the
ngerprint.
A pop-up window appears “Verify
live nger with slot 0 id ’123’?”
Tap Yes.