Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
11

Charging the Battery

The MT380 must be charged for at least 12 hours before its initial use. The battery
begins charging as soon as the power cable is connected.
Using the MT380 for the First Time
The MT380 is ready for use after it has been charged for 12 hours. Now, the MT380 is
ready to start up, calibrate the display, time zone, date and clock.

Powering On the MT380

The MT380 automatically powers on when the 12V DC power adapter is plugged in.
The MT380 welcome screen appears, followed by the Windows CE screen.

Calibrating MT380’s Screen

The screen calibration automatically appears when the unit is powered on for the rst
time, or when the system is reset.
The MT380 is calibrated by tapping
a sequence of screen locations.
Tap gently, but rmly with the
stylus.
When the series of taps is
complete, press the [F5]/[ENTER]
key to conrm calibration or press
the [F4]/[ESC] key to cancel the
calibration.
The Date/Time properties screen
will appear after the calibration has
been conrmed.