TROUBLE SHOOTING

See figure 26, page 31, for component locations.

The heater will not light:

Check that the heater is plugged in and that the wall outlet has power.

Unplug the unit then check all electrical connections against the Wiring Diagram in this manual.

Check the fuse on the circuit board.

If a thermostat is used, ensure it is calling for heat.

If your heater still does not light contact your local dealer for service.

The heater will not operate when hot.

Check that the fuel hopper has enough pellets.

Check that the combustion air inlet is not blocked. Insufficient air supply may cause the fire to burn cold and may cause fuel build up, in the pot, and smother the fire.

Check that the exhaust fan is operating, if the fan is not operating properly it may not generate enough vacuum in the firebox.

Check the 200°F high limit switch. This switch is manually reset, check if it has tripped, if so let cool and reset switch. Check for cause of overheating, if switch trips again contact your local dealer for service

Check the vacuum switch by shorting out the vacuum switch then depress ON/OFF button to "OFF" and back to “ON”. If the unit starts to operate change the vacuum switch.

Check the exhaust temperature switch (located on the exhaust blower) by shorting out the exhaust temperature switch then depress ON/OFF button to "OFF" and back to “ON”. If the unit starts to operate change the exhaust temperature switch.

Exhaust blower does not operate normally.

Check all wiring connections.

Apply 120 volts directly to the exhaust blower, if the blower does not run replace the blower.

Circulation blower does not operate normally.

Check all wiring connections

Apply 120 volts directly to the circulation blower, if the blower does not run replace the blower.

Igniter will not light fuel.

Check electrical connections (including fuse) to the igniter

Check that the igniter tube, which touches the burn pot, is not plugged with ash. If it is plugged remove the debris (be sure to wait until everything has cooled to room temperature)

Check to see that burn pot is installed correctly (see page 29)

If igniter still does not work, replace it.

Note: The igniter should be glowing orange when in operation.

34

Page 34
Image 34
United States Stove 5660(I) manual Trouble Shooting

5660(I) specifications

The United States Stove 5660(I) is a powerful pellet stove designed to provide efficient heating while boasting modern features and a user-friendly interface. Known for its high performance and reliability, this stove is a popular choice for homeowners seeking an effective heating solution for their living spaces.

One of the standout features of the 5660(I) is its capacity to produce up to 50,000 BTUs, making it suitable for heating areas up to approximately 2,500 square feet. This impressive heating capacity ensures that even larger rooms can be warmed quickly and efficiently, contributing to energy savings and comfort during the colder months.

The stove operates primarily on wood pellets, which are an environmentally friendly fuel choice. Wood pellets are made from compressed sawdust and provide a renewable heating source that burns cleanly and efficiently. The use of pellets not only minimizes emissions but also allows the stove to deliver consistent heat output.

In terms of technology, the United States Stove 5660(I) incorporates advanced features to enhance user experience. The stove is equipped with a digital control panel, offering easy programming options for both heating schedules and temperature settings. This digital interface allows homeowners to customize heating preferences, ensuring a comfortable atmosphere without excessive manual adjustments.

Another notable characteristic of the 5660(I) is its large hopper capacity, holding up to 60 pounds of pellets. This feature extends the time between refueling sessions, allowing for more extended periods of operation without interruption. The stove also features an automatic ignition system, simplifying the startup process and making it convenient for users.

The design of the 5660(I) is not just about functionality; it also boasts an aesthetic appeal. With its sleek and contemporary look, it can seamlessly integrate into various home decors. The stove comes in multiple finishes, allowing homeowners to choose a model that best matches their style.

Safety is also a priority with the United States Stove 5660(I). The unit includes various safety features, including an automatic shut-off function in case of a malfunction, ensuring peace of mind while the stove is in use. The high-efficiency burn system minimizes the amount of ash produced, making maintenance less of a chore.

In summary, the United States Stove 5660(I) combines performance, efficiency, and aesthetic appeal, presenting an excellent heating solution for any home. Its advanced features, ease of use, and eco-friendly fuel choice make it a top contender in the pellet stove market. Whether for heating a large living area or creating a cozy atmosphere, the 5660(I) is a dependable choice.