CONGRATULATIONS!
You've purchased a heater from North America's oldest manufacturer of wood burning products.
By heating with wood you're helping to CONSERVE ENERGY!
Wood is our only Renewable Energy Resource. Please do your part to preserve our wood supply. Plant at least one tree each year. Future generations will thank you.
Tools and Materials Needed
TOOLS
Pencil
6 Foot Folding Rule or Tape Measure Tin Snips
Drill, Hand or Electric
Drill Bit 1/8" Dia. (For Sheet Metal Screws) Adjustable Wrench
Screw Driver
Safety Glasses
MATERIALS
6" Elbow, Collar and Thimble; As Required (24 gauge min.)
1/2" Sheet Metal Screws (No. 10A x 1/2") 6" Diameter, 24 gauge, black or blued steel
Underwriters Laboratories (UL,ULC) Listed Residential Type HT (2100°F) Chimney or use a Masonry Chimney in good repair.
Floor Protector Material (R value = 2.0); Size and Installation as specified on Page 4
Furnace Cement (Manufacturer Recommends: Rutland Black Code 78 or Equivalent)
6" Barometric Draft Regulator
| HEATER DIMENSIONS |
33" | FIG. 1 |
| |
|
23"
8"
FLOOR PROTECTOR |
2
