24
USING THE MASTER POWER KEY The Atlas Universal Remote Control has a unique feature
that allows you to sequentially turn on or off al l of your
home entertainment devices with a single key press.
To Program The Master Power Key:
1. On the remote control,press and hold SETUP
until the last-selected device key blinks twice,
then release SETUP.
2. Enter 9- 9- 5.
3. For the first device you want in the power on
sequence,press a device key (e.g.,CBL) once
and then press POWERonce.
4. Repeat step 3 up to three more times to add the
second,third,and fourth device,as desired.
5. To save the settings and exit the program,press
and hold SETUPuntil the CBL key blinks twice,
then release SETUP.
To Clear The Master Power Key:
1. Perform steps 1 and 2 in the above section.
2. Press POWERonce.
3. To clear the settings and exit the program,press
and hold SETUPuntil the CBL key blinks twice,
then release SETUP.
To Operate The Master Power Key:
1. After programming,point the remote control
at the devices. Press CBL once.
2. Press MASTER POWERonce to sequent ially tur n
on or offall home entertainment devices.
NOTE:MASTER POWER only works in the CBLmode.
Ifit is not programmed,only the cable converter will
turn on or off.In any other mode, pressing MASTER
POWERonce will turn on or offthe selected device.
3. You will see the devices turn on or off
according to the programmed sequence.
Atlas Manual 4/8/02 9:37 AM Page 24