Universal Electronics ATLAS OCAP 5-Device manual Device Table, Device Key

KeyFunction

Press ASPECT once to change the aspect ratio of the show you are watching. (Not available on all set-top boxes).

Press SHIFT to access additional cable features (see your cable converter’s manual).

Use PIP ON-OFFto switch the Picture- In-Picture feature on or off (if available on your TV or cable service).

Use PIP SWAP to switch images and sound between the main and window pictures (if available on your TV or cable service).

Use PIP MOVE to move the window picture to different positions in the main picture (if available on your TV or cable service).

Use PIP CH+ (or CH-) to select the next higher (or lower) PIP channel (if available on your TV or cable service).

In the CBL mode, use VIDEO SOURCE to view other video sources (A or B) instead of cable.

In all TV mode, use VIDEO SOURCE to watch TV or video/DVD programs on a desired device.

For amplifiers/receivers, use VIDEO SOURCE to select an input source.

Device Table

NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 10 or “Setting Up a Combo Unit” on page 11.

After programming, the Atlas OCAP 5-Device Remote Control with Learning will be able to control the following types of devices:

Device Key Controls these types of devices

VCR, TV/VCR Combo, PVR (Personal

Video Recorder), or extra DVD Player

DVD Player, or extra VCR, TV/VCR

Combo or PVR

Audio Amplifier, Tuner, or Receiver

www.urcsupport.com/atlasocap

8