www.urcsupport.com/atlasocap
14
CHECKING THE CODES
If you have set up the Atlas OCAP 5-Device Remote
Control with Learning by searching for your device code
(on the previous page), you may need to find out which
four-digit code is operating your equipment.
F
or example, to find out which co de is operating your TV
:
5. To check for other device codes, repeat ste ps 1
through 4, but substitute the appropriate key
(e.g., VCR, DVD, AUD, or CBL) for the device
you are checking. Write down the codes in the
appropriate boxes on page 11.
USING LEARNING
The Atlas OCAP 5-Device Remote Control with Learning
includes a Learningfeature so you can add functions
that are unique to your home entertainment devices
(e.g.,VCR T
racking Up or Down). However, there are some
considerations
.
Learning Precautions
• Your original remote controls must be in working
order for learning to work properly.
• Learned keys are mode-specific, so each one can
store a unique function for each mode.
• Do not use the following keys for learning: Device
Keys, SETUP, Record (•), Tune-In Keys.
1. On the remote control, press TV once; it will
blink once. Then press and hold SETUP until
the TV key blinks twice.
2. Enter 9 9 0. The TV key will blink twice.
3. To view the code for the first digit, press 1
once. Count the number of times the TV key
blinks (e.g., 3 blinks = 3) and write down the
number in the leftmost TV Code box on
page11.
NOTE: If a code digit is 0, the selected mode key will
not blink.
4. Repeat step 3 three more times for the
remaining digits. Use 2 for the second digit, 3
for the third digit, and 4 for the fourth digit.
Finish writing down the code in the TV Co de
boxes on page11.