Universal Electronics ATLAS OCAP 5-Device

www.urcsupport.com/atlasocap

the key on the original remote until the Atlas

OCAP 5-Device Remote Control with

Learning’s LED blinks twice.

NOTE: If the LED displays one long blink, a learning

error has occurred. Try repeating this step

again until a successful capture occurs. If the

function is still not captured, press and hold

SETUP to exitprogramming and review the

“Learning Precautions” on the previous page.

If needed, also see “Troubleshooting” on

page25. After review, start programming

again at step 1.

Deleting a Single Learning Key

his process returns the key to its original programmin

for the mode you select. You can also delete learned

programming by teaching a different function to the key

(see “Programming a Learned Key” on page15)

NOTE: If more than 15 seconds pass between key

presses, the remote exits programming.

3. Press the key containing the learned function

to be deleted twice. The remote will blink

twice.

6. Repeat steps 2 through 5 for another mode

and/or key or press and hold SETUP to exit

programming.

1. Press and hold SETUP until the last-selected

mode key blinks twice, then press 9 7 6.

2. Press a mode key once (i.e., VCR, DVD, AUD,

TV, or CBL).

4. Repeat steps 2 through 3 for another key or

press and hold SETUP to exit programming.