
RE-ASSIGNING DEVICE KEYS
The Cox Universal Remote Control can be set up to con-
trol a second TV or VCR, or any combination of up to
four home entertainment devices. For example, to have
the unitcontrol a TV, a Cable Converter, and two VCRs,
you will need to re-assign the unused AUX key to operate
the second VCR as follows:
1. On the remote control, press VCRonce.
Then press and hold SETUPuntil the VCR key
blinks twice, then release SETUP.
2. Enter 9 - 9 - 2. The VCRkey will blink twice.
3. Press VCRonce, then press AUX once. The
VCRkey w ill blink twice.
4. The AUXkey is now ready to be programmed
for your second VCR. See Programming
Device Control on page 8.
To re-assign other device keys, repeat steps 1–4 and
substitute the key sequence using the following chart:
To Re-Assign Perform Key Sequence
TVas 2nd VCR key SETUP- 9 - 9 - 2- VCR - TV
TVas 2nd
Auxiliary key
SETUP- 9 - 9 - 2- AUX - TV
TVas 2nd Cable key SETUP - 9 - 9 - 2 - CABLE - TV
TVback to TV SETUP - 9 - 9 - 2 - TV - TV
VCRas 2nd TV key SETUP - 9 - 9 - 2 - TV - VCR
VCRas 2 nd
Auxiliary key
SETUP - 9 - 9 - 2 - AUX - VCR
VCRas 2nd Cable key SETUP - 9 - 9 - 2 - CABLE - VCR
VCRback to VCR SETUP - 9 - 9 - 2 - VCR - VCR
AUXas 2nd TV key SETUP - 9 - 9 - 2 - TV - AUX
AUXas 2nd VCR key SETUP - 9 - 9 - 2 - VCR - AUX
AUX
as 2nd Cable key
SETUP - 9 - 9 - 2 - CABLE - AUX
AUX
back to
AUX SETUP - 9 - 9 - 2 - AUX - AUX
Upon completion of a re-assignment, the selected mode
key will blink twice to confirm your selection. Then,
you’ll need to program device control (see Programming
Device Control on page 8).
16
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 16