CHANGING VOLUME LOCK
The CoxUniversal Remote Control is set to control volume
of a device through your TV while in the TV, VCR, or Cable
mode. However, in the Auxiliary mode, you will still have
separate control of of your auxiliary device’s volume.
If your TV is not remote controllable, or if you would like
the volume to be controlled by a different device, you can
change the Volume Lock setting to control a volume
through a non-associated mode (for example, through the
cable in the TV mode).
To change Volume Lock to CABLE mode:
1. On the remote control, press CABLEonce.
Then press and hold SETUPuntil the
CABLEkey blinks twice, then release SETUP.
2. Enter 9 - 9 - 3. The CABLE key will blink twice.
3. Press CABLEonce. It will blink t wice.
4. Now, whenever you pressVOL+, VOL–, or
MUTE, volume will be controlled by your
Cable Converter.
To change Volume Lock to TV mode:
1. On the remote control, press TVonce.
Then press and hold SETUPuntil the TV key
blinks twice, then release SETUP.
2. Enter 9 - 9 - 3. The TV key will blink twice.
3. Press TVonce. It will blink t wice.
4. Now, whenever you press VOL+, VOL–, or
MUTE, volume will be controlled by your TV.
To change Volume Lock to VCR mode:
1. On the remote control, press VCRonce.
Then press and hold SETUPuntil the VCR key
blinks twice, then release SETUP.
17
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 17