Universal Electronics DVR M1055F manual To Activate Channel Control Lock

PROGRAMMING CHANNEL CONTROL LOCK

By default, the Cogeco Atlas DVR 5-Device Universal Remote Control’s channel-control capabilities are unlocked.

NOTE: This feature does not affect the AUD mode.

To Activate Channel Control Lock:

1.On the remote control, press CBL once; it will blink once. Then press and hold SETUP until

the CBL key blinks twice, then release SETUP.

2. Enter 9 - 7- 3. The CBL key will blink twice.

3. Press CH+ once. The CBL key will blink twice.

4.Now, regardless of what mode you select (except AUD), only the channel control capability of your cable converter will be accessible.

To De-Activate Channel Control Lock:

1.On the remote control, press CBL once; it will blink once. Then press and hold SETUP until

the CBL key blinks twice, then release SETUP.

2. Enter 9 - 7- 3. The CBL key will blink twice.

3. Press CH- once. The CBL key will blink four times.

4.Now, the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode.

15