Universal Remote Control omega MX-650 owner manual Erasing Learned Buttons, Macros or Favs

Universal Remote Control, Inc .

Erasing

You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an entire Device’s learned com- mand or macro buttons. You can also erase ALL your learned com- mands on all devices or all your macros or favorite channels every- where. If you really want a fresh start, it is possible to reset everything to the factory default condition.

Erasing Learned Buttons, Macros or Favs

1	Enter SETUP mode by pressing and holding both MAIN and ENT
	for three seconds.
	Note: You have 30 seconds for each step, otherwise the Omega will time
	out automatically.
2	Press the ERASE button.
3	Press either the LEARN, MACRO or FAV button.
	The following screen appears:

ALL — If you press ALL, the Omega displays a SURE? button. After the SURE button is pressed, all the buttons will be erased.

DEVICE— If you press DEVICE, a list of Devices will appear. Press the device button that you wish to erase. The bottom of the screen will flash ERASE twice, then ERASED.

KEY— If you press KEY, you’ll have to navigate to the Device and Page you want using the MAIN, DEVICE and PAGE buttons. Press a button to erase it. The bottom of the display will flash ERASE twice, then ERASED.

4	To return to normal operating mode, press the MAIN button four
	times.

25