Universal Remote Control RF20 manual Erasing Commands Overview

37							38
MacrosButtons,LearnedErasingor	ChannelsFavorite	Erasing Commands - Overview					ErasingLearnedButtons,Macrosor FavoriteChannels
		You can erase an individual button with a learned command, a macro or a favorite
		channel. You can erase an ENTIRE Component’s learned command or macro buttons.
		You can also erase ALL your learned commands on all Components or all your macros
		or favorite channels everywhere.
		If you really want a fresh start, it is possible to reset everything to the factory default
		settings.
		Erasing Learned Buttons, Macros or Favorite Channels
		STEP 1:	STEP 2:	STEP 5:		STEP6:
		Press and hold the MAIN and ENT (Enter)	Press a PAGE button to display Page 2 of	If you press ALL, the RF20 displays a		To return to normal operating mode,
		buttons at the same time for approximately	Setup.	“SURE?” button. After the SURE button is		press the MAIN button four times.
		3 seconds, until the word “SETUP” is	STEP 3:	pressed, all the buttons will be erased.
		displayed at the top of the LCD screen. This		If you press DEVICE, a list of Components will
			Press the ERASE display button on the
		signals that you are now in setup mode.
	COMMANDSERASING		LCD screen.	appear. Press the Component button that you			ERASINGCOMMANDS
		IMPORTANT:You now have 30 seconds to	STEP 4:	wish to erase. The bottom of the screen will
		perform the next step while you are in SETUP		flash ERASE twice, then ERASED.
		mode. If you don’t press a button within 30	Press either the LEARN, MACRO or FAV
				If you press KEY, you’ll have to navigate to
		seconds, SETUP will disappear from the screen,	button. The following screen appears:
		signaling that you have exited setup mode and
				the Component and Page you want using the
		you will need to start over.
			ALL - Erases ALL of the specified	MAIN, COMPONENT and PAGE buttons.
			(Learned, Macro or FAV but-tons every-	Press a button to erase it. The bottom of the
			where in the RF20)	display will flash ERASE twice, then ERASED.
			DEVICE - Erases all learned or Macro
			buttons in a single Component (NOTE:
			This option is not available for FAVs.)
					SURE
			KEY - Erases one button only.		BUTTON