US Amps owner manual TU 4360C RBG, AX-TU4360C Channel Amplifiers Controls and Features

AX-TU4360C

4-Channel Amplifiers

Controls and Features

The AX-4360C features a selectable two-way electronic crossover with independent front and rear mid-high frequency adjustment and 2 ohm per channel stability. Power is provided by four 75 watt channels that can be bridged as front and rear pairs into a 4 ohm load for a total of 180 watts per bridged pair.

WARNING: NEVER use ground-loop isolation on the input of your U.S.Amp! It doesn’t need it!

	1	2			3	4	5
		Front	Rear	Front	Rear	SUB
		Gain	Gain	Freq	Freq	Freq	LP HP Full	LP HP Full
L								Pwr Prot
		Max	Max 50 500 50 500 50 500				Front	Rear
R		AX-TU4360C RBG
Front	Rear	Four Channel Amplifier					U.S.A.
Input	Input

1Amplifier Input The amplifier MUST receive input on BOTH RCA jacks for proper operation.

2Input Gain is variable from 1 to 9 volts for full output. Best results are achieved by adjusting the control to the lowest setting in relation to the output of the source unit.

3Low-pass Crossover Control

For the internal amplifier, adjustable from 50 Hz to 500 Hz @ 24dB.

4Remote Bass Gain A phone jack that accepts the included RBG control

harness to allow the amplifier volume to be controlled from the passenger compartment.

5Low-pass Crossover 3-way Switch

A 3-way switch which selects the full-range/high-pass/low-pass crossover feature.

6