USING THE
STOPWATCH FEATURE
1. Press the MODE button to select the Stopwatch operating mode.
2.Press the ST/SP button to start the stopwatch.
3.Press the ST/SP button to stop the stopwatch.
4.Press and hold the SET button to reset the stopwatch.
THE TRANSMITTER
The transmitter counts your heartbeat and sends the data to the receiver.
ATTACHING THE TRANSMITTER
Attach the strap to the transmitter by inserting the strap clip through the backside of the corresponding shaped hole on the transmitter. Gently push down to secure.
1.Moisten the conductive pads on the backside of the transmitter with water or a conductive gel to ensure a solid contact.
CONDUCTIVE PADS
2.Strap the transmitter across your chest. Adjust the strap until the transmitter sits snugly below your pectoral muscles for an accurate heart rate signal.
11
