Regulatory Approvals

In the location or address line of your Web browser, type http://192.168.123.254 to access the Configuration Utility. The Web-based Configuration Utility is where you can go to make any changes to the settings of the Wireless Cable/DSL Router. There is no default password for the Wireless Cable/DSL Router, so just click Login. Click Primary Setup and follow the on-screen instructions. You will need any network information you collected earlier. When prompted, select the WAN type as Dial-up Modem and continue to follow the on-screen instructions.

Federal Communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the manufacturer’s instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interfer- ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Manufacturer’s Disclaimer Statement

The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or the products associated with it at any time without obligation to notify any person or organization of such changes. In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.

UL Listing/CUL Listing or CSA Certified

This information technology equipment is UL-Listed and CUL Listed or CSA-Certified for the uses described in the users guide.

CE Declaration of Conformity

We, U.S. Robotics Corporation of 935 National parkway, Schaumburg, Illinois, 60173- 5157, USA, declare under our sole responsibility that the U.S. Robotics Wireless

Cable/DSL Router to which this declaration relates is in conformity with the following standards and/or other normative documents:

EN60950

EN55022

EN55024 EN61000-3-2 EN61000-3-3

We hereby declare that this product is in conformity to all the essential requirements and other relevant provisions of Directive 1995/5/EC. The conformity assessment procedure referred to in Article 10(3) and detailed in Annex II of Directive 1999/5/EC has been followed.

This product has been approved for use in the following countries: France, Germany, Italy, Spain, Portugal, The Netherlands, Austria, Denmark, Switzerland, and the United Kingdom.

U.S. Robotics Corporation Limited Warranty

HARDWARE: U.S. Robotics warrants to the end user (“Customer”) that this hardware product will be free from defects in workmanship and materials, under normal use and service, for the following length of time from the date of purchase from U.S. Robotics or its authorised reseller:

Two (2) years

U.S. Robotics’ sole obligation under this express warranty shall be, at U.S. Robotics’ option and expense, to repair the defective product or part, deliver to Customer an equivalent product or part to replace the defective item, or if neither of the two foregoing options is reasonably available, U.S. Robotics may, in its sole discretion, refund to Customer the purchase price paid for the defective product. All products that are replaced will become the property of U.S. Robotics. Replacement products may be new or reconditioned. U.S. Robotics warrants any replaced or repaired product or part for ninety (90) days from shipment, or the remainder of the initial warranty period, whichever is longer.

SOFTWARE: U.S. Robotics warrants to Customer that each software program licensed from it will perform in substantial conformance to its program specifications, for a period of ninety (90) days from the date of purchase from U.S. Robotics or its authorised reseller. U.S. Robotics warrants the media containing software against failure during the warranty period. No updates are provided.

U.S. Robotics’ sole obligation under this express warranty shall be, at U.S. Robotics’s option and expense, to refund the purchase price paid by Customer for any defective software product,

or to replace any defective media with software which substantially conforms to applicable U.S. Robotics published specifications. Customer assumes responsibility for the selection of the appropriate applications program and associated reference materials. U.S. Robotics makes no warranty or representation that its software products will meet Customer’s requirements or work in combination with any hardware or applications software products provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. For any third-party products listed in the U.S. Robotics software product documentation or specifications as being compatible, U.S. Robotics will make reasonable efforts to provide compatibility, except where the noncompatibility is caused by a “bug” or defect in the third party’s product or from use of the software product not in accordance with U.S. Robotics’ published specifications or User Guide.

THIS U.S. ROBOTICS PRODUCT MAY INCLUDE OR BE BUNDLED WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH IS GOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. THIS U.S. ROBOTICS WARRANTY DOES NOT APPLY TO SUCH THIRD-PARTY SOFTWARE. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE END-USER LICENSE AGREEMENT GOVERNING THE USE OF SUCH SOFTWARE.

OBTAINING WARRANTY SERVICE: Customer must contact a U.S. Robotics Corporate Service Centre or an Authorised U.S. Robotics Service Centre within the applicable warranty period to obtain warranty service authorisation. Dated proof of purchase from U.S. Robotics or its authorised reseller may be required. Products returned to U.S. Robotics’ Corporate Service Centre must be pre-authorised by U.S. Robotics with a Service Repair Order (SRO) number marked on the outside of the package, and sent prepaid and packaged appropriately for safe shipment, and it is recommended that they be insured or sent by a method that provides for tracking of the package. The repaired or replaced item will be shipped to Customer, at U.S. Robotics’ expense, not later than thirty (30) days after U.S. Robotics receives the defective product. Return the product to:

In the United States:	In Canada:	In Europe:
USR-Walnut	U.S. Robotics	FRS Europe BV.
528 Spanish Lane	Unit-100 13751 Mayfield Pl.	Draaibrugweg 2
Walnut, Ca. 91789	Richmond, B.C. Canada V6V 2G9	1332 AC Almere
		The Netherlands

Wireless Cable/DSL Router specifications

The USRobotics Wireless Cable/DSL Router is a powerful device designed to provide reliable internet connectivity for homes and small offices. As a versatile hub for managing various networking tasks, it combines essential features of both routers and modems to ensure seamless internet access for multiple devices.

One of its main features is its dual WAN capability, allowing users to connect to two different internet sources simultaneously. This feature is particularly beneficial for users looking to maintain uninterrupted internet service, as it allows for automatic failover between connections. This ensures that in the event of a primary connection failure, the router will automatically switch to the secondary connection, providing continuous access to the internet.

The USRobotics router supports high-speed wireless standards, including 802.11n, which enables faster data transfer rates and improved coverage compared to earlier standards. With the capability to support multiple devices simultaneously without sacrificing performance, this router is ideal for households with numerous internet-connected devices such as smartphones, tablets, and smart TVs.

Security is a top priority for USRobotics, and this router includes advanced security features to protect users from unauthorized access. The device supports WPA2 encryption, ensuring that data transmitted over the network is secure and that only authorized users can gain access to the network. Additionally, the router offers features such as a built-in firewall that helps protect against external threats and vulnerabilities.

Convenience is another hallmark of the USRobotics Wireless Cable/DSL Router. Its easy-to-use web interface allows for straightforward setup and management, enabling users to easily modify network settings, set up parental controls, and manage connected devices. This level of user-friendly design makes it an excellent choice for both tech-savvy individuals and those less familiar with networking technology.

Moreover, the router features multiple Ethernet ports, enabling direct connections for devices that require stable, wired internet access. This versatility makes it suitable for gaming consoles, desktops, and entertainment systems that demand high-speed connectivity.

In conclusion, the USRobotics Wireless Cable/DSL Router stands out for its dual WAN capability, robust wireless standards, enhanced security features, and user-friendly management options, making it a comprehensive solution for both home and small business networking needs. Its reliable performance ensures that users can enjoy fast, secure internet access whenever they need it.

USRobotics Wireless Cable/DSL Router manual Regulatory Approvals

Models: Wireless Cable/DSL Router