UTStarcom CDM-8615 manual Power Connection, Battery Talk Time, Battery Life Time for NEW Battery

BATTERY USAGE

CBATTERY CHARGING

H

1POWER CONNECTION

1Plug the AC charger into a standard outlet.

2Plug the other end of the AC Charger into the bottom of your cellular telephone. The battery must be attached to the cellular telephone.

• When you charge the battery with the phone turned off, you will see a charging status screen. You cannot operate the phone until it is turned on.

•The battery is not charged at the time of purchase.

•Fully charge the battery before use.

•It is more efficient to charge the battery with the handset turned off.

•The battery must be connected to the phone in order to charge it.

•Battery operating time gradually decreases over time.

•If the battery fails to perform normally, you may need to replace the battery.

BATTERY USAGE

BATTERY TALK TIME				C
				H
The operating time is subject to your handset usage and configuration.
				1
	Battery Capacity	PCS	AMPS
	STD 1000 mAh	Up to 190 m	Up to 80 m
	EXT 1700 mAh	Up to 330 m	Up to 130 m

BATTERY LIFE TIME (FOR NEW BATTERY)

The operating time is subject to your handset usage and configuration.

Battery Capacity	CDMA	AMPS
STD 1000 mAh	Up to 190 Hours	Up to 20 Hours
EXT 1700 mAh	Up to 310 Hours	Up to 35 Hours

These times are for a new battery. Talking and Standby time may decrease over time.

12 13