INSTALLING TO WALL

Continued

4.For thin walls (1/2" or less), insert red key into wall anchor. Push red key to “pop” open anchor wings. IMPORTANT: Do not hammer key!

For thick walls (over 1/2" thick) or solid walls, do not pop open wings.

Figure 9 - Popping Open Anchor Wings For Thin Walls

5.Place mounting bracket onto wall. Line up last hole on each end of bracket with wall anchors.

6.Insert mounting screws through bracket and into wall anchors.

7.Tighten screws until mounting bracket is firmly fastened to wall.

Placing Heater On Mounting Bracket

1.Locate two horizontal slots on back panel of heater.

2.Place heater onto mounting bracket. Slide horizontal slots onto stand-out tabs on mounting bracket.

Horizontal Slots

Stand-Out Tab

Mounting Bracket (attached to wall)

Figure 10 - Mounting Heater Onto Mounting Bracket

Installing Bottom Mounting Screws

1.Locate two bottom mounting holes. These holes are near bottom on back panel of heater (see Figure 11).

2.Mark screw locations on wall.

3.Remove heater from mounting bracket.

4.If installing bottom mounting screws into hollow or solid wall, install wall anchors. Follow steps 1 through 4 under Attaching To Wall Anchor Method, page 12.

If installing bottom mounting screw into wall stud, drill holes at marked loca- tions using 9/64" drill bit.

5.Replace heater onto mounting bracket.

6.Place spacers between bottom mounting holes and wall anchor or drilled hole.

7.Hold spacer in place with one hand. With other hand, insert mounting screw through bottom mounting hole and spacer. Place tip of screw in opening of wall anchor or drilled hole.

8.Tighten both screws until heater is firmly secured to wall. Do not over tighten. Note: Do not replace front panel at this time. Replace front panel after making

gas connections and checking for leaks (see pages 14-16).

Figure 11 - Installing Bottom Mounting Screws

13

 

100100

Page 13
Image 13
Vanguard Heating VGP30B, VP2000BB installation manual Placing Heater On Mounting Bracket, Installing Bottom Mounting Screws

VGP30B, VP2000BB specifications

The Vanguard Heating VGP30B and VP2000BB are remarkable units designed to provide efficient, reliable heating solutions for various environments. With a focus on performance, durability, and user convenience, both models are engineered to meet a range of heating needs for residential and commercial applications.

The Vanguard VGP30B features advanced combustion technology that ensures optimal fuel efficiency and reduced emissions. This model operates on propane or natural gas, which allows for flexible installation options. The heat output ranges from 30,000 to 100,000 BTU, making it suitable for larger spaces while still maintaining a compact design. One of its standout features is the intuitive control system, which includes a programmable thermostat for easy temperature regulation and energy management.

Additionally, the VGP30B is built with a durable steel construction that enhances its longevity and performance. This model includes a built-in safety shutoff mechanism that provides peace of mind by ensuring the heater operates safely. The easy-access design not only simplifies maintenance but also minimizes downtime, making it a favorite among professional installers.

On the other hand, the VP2000BB is specifically designed for larger areas, with an impressive heating capacity of up to 200,000 BTU. This model is equipped with multiple heat output settings, allowing users to customize warmth according to their specific needs. The VP2000BB uses state-of-the-art infrared heating technology that effectively warms objects and surfaces in the room rather than merely heating the air, resulting in a comfortable and consistent heat distribution.

A key benefit of the VP2000BB is its energy-efficient design, which helps reduce heating costs over time. Its built-in fan system enhances heat circulation, ensuring that even the farthest corners of an area receive adequate warmth. The robust construction and weather-resistant materials also make this unit ideal for outdoor applications, such as workshops or temporary outdoor gatherings.

In summary, both the Vanguard VGP30B and VP2000BB encapsulate the brand's commitment to quality, energy efficiency, and user-friendly features. Whether for residential or industrial use, these heaters provide reliable performance that can be tailored to meet individual heating requirements. With their advanced technologies and durable design, they are excellent choices for ensuring a warm and comfortable environment.