Vanguard Managed Solutions FLAME-MAX installation manual Installing Logs, Installation, Continued

OWNER’S MANUAL

INSTALLATION

Continued

INSTALLING LOGS

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

CAUTION: After installation and periodically thereafter, check to ensure that no flame comes in contact with any log. With the heater set to High, check to see if flames contact any log. If so, re- position logs according to the log installation instructions in this manual. Flames contacting logs will create soot.

It is very important to install the logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.

1.Place one-piece log set on grate to fit as illustrated in Figure 18 for Vintage Oak model and Figure 19 for Golden Oak or Birch models. Make sure bot- tom of front log is in front of “U”- shaped cutout in center of chassis (see Figure 16 for Vintage Oak model and Figure 17 for Golden Oak or Birch models). Log will fit securely on chas- sis. Note: 36" and birch models have more features but fit on the chassis the same. IMPORTANT: Make sure log does not cover any burner ports.

2.Place lava rock around base of heater.

One-Piece		One Piece
Log Set
	Burner	Log Set

Chassis	Burner	Figure 18 - Installing Vintage Oak One-
	"U"-shaped
		Piece Log Set (Top View)
	Cutout in
	Chassis		One Piece
Figure 16 - Installing Vintage Oak One-		Burners	Log Set

Piece Log Set

One Piece Log Set

Figure 19 - Installing Golden Oak or Birch

One-Piece Log Set (Top View)

Burner

Chassis

"U"-shaped Cutout in Chassis

Figure 17 - Installing Golden Oak or Birch

One-Piece Log Set

105187 13