7. Creating A New Partition:
Note: Most hard drives should come with a CD that includes its installation program. If not, a download should be available on the manufacturers website. The best way to partition a new hard drive is by using the manufacturers program. However, if that is not possible, please try the following instead (if using Mac OS 9 or below, please refer to your hard drive documentation for information on formatting/partitioning the hard drive):
Warning: Doing the following will erase any existing data on the drive. If the drive is damaged and you wish to recover the data, continuing may overwrite the existing information!
Windows 98SE/ME:
1)You will need to use the FDISK utility that is included under
2)Once complete, you should now be able to see the drive in Windows Explorer.
Windows XP/2000:
1)Right click on "My Computer" and choose Manage.
2)Under “Storage” on the LEFT pane, select Disk Management
3)Windows should now give you the option to initialize the disk. If not, locate the new drive, right click on the new disk (where it reads "Disk #") and choose Initialize. (This step may not be required for some hard drives.)
4)Go through the wizard.
5)Once complete, locate your hard drive in the bottom right pane. Right click on the area with a status bar (to the right of the “Disk #” area) and choose New Partition.
6)Follow the directions of the wizard. The recommended partition type is “primary” and the recommended file system is “NTFS.” Please note that Windows XP/2000 limits FAT32 partitions to only 32GB. Also, Windows 98 is not capable of reading the NTFS file system.
7)Once complete, you should now be able to see the drive in Windows Explorer.
13
