Vantec PCI & PCI-E Card & CardBus manual Installation

5.5. Connecting Drives:

SATA/eSATA PCI Host Controller (UGT-ST300) / SATA/eSATA PCI-Express Host Controller (UGT-ST400):

Internal SATA:

Connect SATA cable to the Internal SATA port on the card.

Connect the other end to the drive.

External SATA:

Connect eSATA cable to the External SATA port on the card. Connect the other end to the drive or enclosure.

2-Port eSATA PCMCIA CardBus (UGT-ST350CB):

External SATA:

Connect eSATA cable to either External SATA port on the CardBus. Connect the other end to the drive or enclosure.

Installation

12