Vantec PCI & PCI-E Card & CardBus manual Installation

5. Installation:

SATA/eSATA PCI Host Controller (UGT-ST300) / SATA/eSATA PCI-Express Host Controller (UGT-ST400):

5.1.Hardware Installation:

1)If you have an LED you would like to connect to the drive activity header, connect it first. If not, skip this step.

1-2 External Port

3-4 Internal Port

Pins 2 and 4 are positive

2) Insert card into an open PCI slot in your computer. When firmly

seated in the PCI slot (or PCI-E slot for ST400), screw in mounting bracket.

Installation

6