Venturer PLV1615S owner manual Connecting a PC, Connect the Power Cord

CONNECTIONS

CONNECTING A PC

Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable (not included).

Connect a stereo audio cable (not included) to the PC AUDIO IN jack on the bottom of this unit, and the other end to the AUDIO OUT jack on your computer’s sound card.

CONNECT THE POWER CORD

•Connect the AC power cord into a wall outlet.

•Press the STANDBY/ON button on the unit or remote control to turn on the unit.

Note:

•Be sure the AC power cord is disconnected and all functions are off before making connections.

•Make sure that all the components are connected correctly.

•To prevent electrical shock, match wide blade of plug to wide slot of wall outlet, then fully insert.

•When you are not going to use the unit for a long period of time, disconnect the power cord.

13

PLV16151S1 VEN - WM CANADA.pmd 13 1/10/2007, 5:06 PM