Manuals / Veo / Photography / Digital Camera

Veo 802.11b manual Accessing the Camera, Usernames and Passwords

Models: 802.11b

1 69
Download 69 pages 1024 b
Page 15
Image 15

Accessing the Camera

You can access Observer cameras from any Windows PC on your LAN. There are two easy ways to access a camera, by browsing the camera’s on-board homepage using Internet Explorer or using the included PC application Veo Observer Studio.

Chapter

3

The browser method does not require any special PC software other than an ActiveX control which is download and installed automatically. This gives you the freedom to

access cameras from anywhere on the Internet without needing to install any software. Observer Studio provides powerful additional features such as multi-camera viewing and single click camera access.

The first time you access a camera you should use the browser method. Access to the camera’s configuration pages, where you can change your username and password, are accessed from the homepage. With either method, you will need to know about usernames and passwords first.

3.1 Usernames and Passwords

Note: The camera ships with one default username admin and password password (all lowercase). It is strongly recommended that you change the password the first time you access the camera to prevent unauthorized viewing. Refer to Appendix A: Restoring Factory Default Settings to reset your username and password to the factory default settings if you forget your username/password.

Access to Observer cameras is password protected to ensure privacy. To access the camera you need a username and password. There are three levels of access that can be assigned to each user:

1.Admin (Administrator) Administrators have full access to all the camera’s features and settings. Administrator accounts should be reserved for those who need to change the camera’s configuration. Note: Be sure not to give an admin username and password to anyone other than those who need it.

2.User (Normal user) People with user level usernames and passwords can access all the cameras features but are not able to change any settings.

3.Guest. (Guest) Guests are only able to view the camera’s image. They cannot control the built-in pan and tilt, take snapshots, or record video clips.

Please refer to Section 3.3: Camera Configuration for more information on setting up user accounts.

Note: Only one user may access the camera at a time and priority is given to the higher level user. For example, if a normal user is accessing the camera and an admin level user logs on, the normal user will be logged off. If a user of equal or lower level attempts to log in, they will be notified that the camera is busy.

Page 15 of 69

Page 14 Page 16
Page 15
Image 15
Veo 802.11b manual Accessing the Camera, Usernames and Passwords
Page 14 Page 16

802.11b specifications

The Veo 802.11b is a notable wireless networking standard that emerged in the late 1990s as one of the first widely adopted protocols for local area networks (LANs). Operating in the 2.4 GHz frequency band, 802.11b provided users with the ability to connect to the internet and share resources without the constraints of wired connections.

One of the primary features of 802.11b is its maximum data transfer rate of 11 Mbps, which was impressive at the time of its release. This speed allowed for basic internet usage, file sharing, and general network connectivity. While this might seem slow by today’s standards, it laid the foundation for the rapid evolution of wireless technologies.

Veo 802.11b utilized Direct Sequence Spread Spectrum (DSSS) technology, which enhanced the reliability of the connection by spreading the signal over a wider frequency range. This technique helped to reduce interference, particularly in environments with multiple wireless devices operating on the same frequency. The standard also included mechanisms for ensuring data integrity, such as the use of cyclic redundancy check (CRC) algorithms.

In terms of range, Veo 802.11b offered coverage of approximately 100 to 300 feet indoors, and up to 1000 feet outdoors depending on environmental factors. This range made it suitable for home networks and small office environments, allowing users to access the internet from different locations within a building without the need for cumbersome cabling.

Another characteristic of the 802.11b standard was its compatibility with the earlier 802.11 standard, ensuring that devices using both protocols could operate together. This backward compatibility facilitated a smoother transition for users upgrading their systems, as they could maintain connectivity with older devices while enjoying the benefits of faster wireless networking.

Security was also an important aspect, though initially limited. The standard employed Wired Equivalent Privacy (WEP) for data encryption, which provided a basic level of security to protect wireless communications. However, as vulnerabilities were discovered in WEP, the need for stronger security protocols became evident, leading to further developments in later standards.

Ultimately, the Veo 802.11b played a pivotal role in revolutionizing wireless communications. It established the groundwork for further advancements such as 802.11g and 802.11n, which provided higher speeds and greater efficiency. While newer standards have since eclipsed its capabilities, 802.11b remains a significant milestone in the evolution of wireless networking technology. Its influence can still be seen in the pervasive use of wireless networks in homes, offices, and public spaces around the world today.