OnBoard FDC: Use this to enable or disable floppy drive controller.

OnBoard Serial Port: Use this to set addresses for the onboard serial ports or disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 / COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].

OnBoard Infrared Port: You may select [Auto] or [Disabled] for this onboard infrared port feature.

OnBoard Parallel Port: Select Parallel Port address or disable Parallel Port. Configuration options: [Auto], [Disabled], [378], [278].

Parallel Port Mode: Set the operation mode of the parallel port. The default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP version in the following item, “EPP Version”.

OnBoard Midi Port: Select address for Midi Port or disable Midi Port. Configuration options: [Disabled], [330], [300], [290], [292].

Midi IRQ Select: Use this to select Midi IRQ. Configuration options: [3], [4], [5], [7], [10], [11].

OnBoard Game Port: Select address for Game Port or disable Game Port. Configuration options: [Disabled], [200h], [208h].

OnBoard IDE: You may enable either the primary IDE channel or the secondary IDE channel. Or you may enable both the primary and the secondary IDE channels by selecting [Both]. Set to [Disabled] will disable the both.

Configuration options: [Disabled], [Primary], [Secondary], [Both]. OnBoard LAN: This allows you to enable or disable the onboard LAN feature. OnBoard AC’97 Audio: Select [Disabled], [Auto] or [Enabled] for the onboard

AC’97 Audio feature.

System Hardware Monitor: You may check the status of the hardware on your system. It allows you to monitor the parameters for CPU temperature, Motherboard temperature, CPU fan speed, and critical voltage.

AMIBIOS SETUP UTILITY - VERSION 3.31a

Advanced

 

System Hardware

Monitor

 

[ Setup Help ]

 

 

 

CPU Temperature

35 C / 95 F

 

M / B Temperature

27 C / 82 F

 

CPU FAN Speed

3110

RPM

 

Chassis FAN Speed

0

RPM

 

Vcore

1.72

V

 

+

3.30V

3.31

V

 

+

5.00V

4.97

V

 

+

12.00V

12.16 V

 

 

 

 

 

 

F1:Help

:Select Item

+/-:Change Values

F9:Setup Defaults

Esc:Previous Menu

 

Enter:Select Sub-Menu

F10:Save & Exit

2 6

Page 26
Image 26
Verbatim K7VT4-8X, K7VT4-4X user manual Rpm