SETUP
Smart Card Reader Use
Smart Card
Reader Use
To Conduct a Smart Card Transaction
The smart card transaction procedure can vary depending on the application. Verify the proper procedure with your application provider before performing a smart card transaction.
1Position the smart card with the gold contacts facing upward (see Figure 14).
2Insert it into the smart card reader slot in a smooth, continuous motion until it seats firmly.
3Remove the card when the display indicates the transaction is completed.
Figure 14 Smart Card Reader Use
CAUTION Leave the smart card in the card reader until the transaction is completed. Premature removal can void the transaction.
Magnetic Card Reader Use
The Vx810 has a magnetic card reader that uses a triple track stripe reader. This gives the unit greater reliability over a wide range of swipe speeds and operating environments.
To Conduct a Credit/ | 1 | Position a magnetic card with the stripe facing the keypad. |
Debit Card | 2 | Swipe it through the magnetic card reader. |
Transaction |
Figure 15 Magnetic Card Reader Use
18VX810 INSTALLATION GUIDE
