VeriFone Vx810 manual Installing the Screws

SETUP

Contactless Module

5Slide the tabs on the narrow end of the metal plate down to engage the ears of the Vx810.

6Carefully hold both devices and the metal plate in place. Screw fine-thread black machine screw into the Vx810 first. Next, install the 3 coarse-thread self taping screws into the Vx810 CTLS module..

Figure 18 Installing the Screws

WARNING Be careful. The self taping screws will require a moderate amount of force to install. Be sure to use the proper size screw driver and to securely support the Vx810 CTLS module to avoid any possible damage.

Figure 19 Installed Vx810 CTLS Module

NOTE You can verify if the module is installed properly through the CONTACTLESS DIAGNOSTIC function in System Mode of the Vx810.

For more information, please refer to the Vx810 Reference Guide, VPN 24964.

20VX810 INSTALLATION GUIDE