Heat Protection Mode
Note: Consecutive uses and high ambient temperatures can cause the Interchangeable Head surface to become hot. The device monitors the Head surface temperature during each care cycle to ensure that the Head maintains an optimum temperature. Once the device has reached the optimum temperature limit, it will enter Heat Protection Mode and the device will limit operation until suffi cient surface cooling has been achieved.
When the Information Display is displaying “HP”, the device has reached its optimum temperature limit and will not continue to operate until a cool down period has been completed.
If your device enters Heat Protection Mode:
The Information Display will display “HP” and the device will beep 10 times and immediately terminate the cycle.
Step 1: Set the device back on the Charging Stand and allow cooling.
Step 2: Once “HP” is no longer visible in the Information display, the device is ready for use.
Step 3: Resume normal operation as outlined on page 9 of this manual.
12
