Step 1
Step 2
Step 3
Step 4
Step 5
Operating Instructions
Proper Use Operations
Note:
•For best results, remove all
•During use, hold the device in a single location until the cycle is complete.
Step 1: To ACTIVATE, push the Power Button until the device beeps once, indicating that the care cycle is ready to begin.
Step 2: Apply protective eyewear (goggles).
Step 3: To START, place the device against the desired area of your skin to receive care. The LED lights will turn on and the cycle will begin once the device is in contact with your skin.
Step 4: Hold device fi rmly in place until the device beeps twice signaling that the care cycle is complete. Do not move the position of the device on your skin. Device will beep if removed from skin — see page 10.
Step 5: Replace the ClearWave® Soothing Skin System to the Charging Stand to fully charge for the next treatment.
Note: To manually turn OFF the ClearWave® Soothing Skin System prior to the end of a cycle, push and hold the Power Button for approximately 3 seconds until the device beeps twice.
Daily Care for Your Skin
The daily care regimen is the same for both interchangeable heads. When using the ClearWave® Soothing Skin System, care for each desired area of the skin for the 3 minute cycle. You may care for a particular area up to a maximum of 15 minutes (5 cycles) in a 24 hour period. For optimal results, allow 24 hours before your next care cycle.
9
